Many users have recently reported the Canon Printer Error 6800, which prevents them from printing or using the printer. As a result, we’ve put together this comprehensive guide to help you fully address this problem by deploying the appropriate solutions.
Many users have recently reported Canon Printer Error 6800, which prevents them from printing or otherwise using the printer. As a result, we’ve compiled this comprehensive guide to assist you in fully addressing this issue by deploying the appropriate solutions.
Following some basic troubleshooting techniques, we concluded that the following are some of the most important reasons for the occurrence of this error.
- A general glitch can cause Error 6800, which prevents the printer from properly loading its configurations. As a result, as described in the methods below, a simple restart can sometimes resolve this issue.
- Debris: It’s possible that some debris has accumulated inside the printer over time, preventing it from properly moving its mechanical parts and resulting in this error when attempting to print. As a result, thoroughly cleaning the printer as described in the solution below can help you overcome this stumbling block.
Now that you’re aware of the majority of the causes of Error 6800 on Canon printers, it’s time to put the fixes in place.
- To begin, press and hold the power button on the printer for 3-4 seconds to turn it “OFF.”
- Then, unplug the printer’s power supply and wait three to four minutes.
- Reconnect the power source and turn the printer “ON” once the waiting period is over.
- Make sure your printer works properly by testing it.
- Start by restarting your printer as described in “Solution 1.”
- Then, from the drop-down menu, choose “General Tools Software.”
- Then, to complete the Resetting procedure, locate the USB port and select “Set Destination 1.”
- Finally, double-check that the Canon printer error 6800 is no longer present.
- To turn your printer “ON,” plug in the power supply.
- Then, for about seven to nine seconds, press and hold the “Reset/Stop” button.
- Now, hold down the Reset button for about five to six seconds while simultaneously pressing and holding the Copy button.
- Then, first, release the copy button, followed by the reset/stop button.
- Now that you have reset the printer, you can use it again.
- To use a repairing tool, you must first download it if you haven’t already.
- To download the software, copy and paste the following link into your browser.
- When the download is complete, run the programme and follow the on-screen installation instructions.
- Now, launch the software and select “Scan.” Hold down the button for a few seconds until the scan is finished.
- When the scan is complete and the errors are displayed on the screen, choose “Fix Errors.”
- Finally, restart your computer and printer to see if the Canon 6800 printer problem is fixed.
- Check the printer’s cover for any foreign objects, such as a line paper pin or dirt.
- Remove anything that is unnecessary or foreign before removing the cartridge.
- Remove the ink cartridges from the print head and wet a cotton swab.
- Clean each ink cartridge and the print head separately, then set the clean cartridges and print head aside to dry.
- Return all of the components to their original positions after drying and close the cover.
- Check to see if the error: 6800 has been resolved by turning on the printer.
This type of error is usually caused by a fault in the logic board. If this is the case, replacing the faulty logic board with a new one will solve the problem. Because this type of repair is usually impossible to perform at home, sending the printer in for service is the best option.
There is a good chance that the printer will be internally damaged or that the software will become corrupted. To fix this, go to your local “Canon Service Center” and request a printer repair.
Canon printers are generally covered by a one-year warranty. If the printer is not damaged on the outside or has not been opened, you are entitled to a warranty. To make a warranty claim, you must have proof of purchase, which entitles you to service or replacement. Even if your warranty has expired, you can still apply for the “Canon Upgrade Program,” which allows you to replace an old or broken printer with a new one.