In this blog, we will discuss this error and demonstrate how to resolve Canon Printer Error Code 5800 in a few simple steps. Error Code 5800 can be easily removed if you follow the simple troubleshooting steps recommended by Canon Printer experts.
The waste ink counter has been reset, as indicated by error code 5800. (multiple flashes of yellow and orange light). Canon printers frequently need to be reset in order to return to their factory settings. The Canon printer must be reset after a significant amount of printer activity. If the Canon printer needs to be reset, it will usually alternately blink orange and green, and the error code 5800 will appear on the monitor. Then, in order to resolve the issue as soon as possible, you must follow the solutions recommended by printer tech support professionals.
Follow the steps or solutions provided to resolve this error.
Replace the waste ink absorber in the following manner to permanently resolve this issue.
Step 1:Then, press the “Power” button.
Turn off the Canon Printer but leave it plugged in. Then, while still holding the “Stop/Reset” button, press the “Power” button.
Step 2: Then, hold down the “Power” button.
Turn the Canon Printer off but leave it plugged in. Then, while keeping the “Stop/Reset” button depressed, press the “Power” button.
Step 3: Enter the Service Mode
When you release the “Power” and “Stop/Reset” buttons (in any order), the printer enters service mode. (Waiting for menu choice.)
Step 4: Click the “Stop/Reset” button.
When the on/off light turns green, press the “Stop/Reset” button as many times as indicated in the table below.
(When you press the “Stop/Reset” button, the LED alternates between orange and green, starting with orange.)
Step 5: Switch on your Canon printer.
- Turn off and then on the printer.
- Examine the Canon Printer Error Code 5800 to see if it has been resolved. Otherwise, proceed to the next option.
The solution is to put the Canon printer into service mode, which will aid in the resolution of the issue. Ascertain that your Canon printer perceives the ink absorber pad as empty rather than full. If you can open your printer, please use a napkin to clean the ink deposit and clear it a little. Follow the steps below.
- To begin, turn on your Canon multifunction printer.
- Then, on the printer, select the menu option.
- Press the “SCAN,” “COPY,” and “SCAN” buttons in that order to put your Canon printer in service mode. Please keep in mind that, like a computer’s BIOS, the service mode menu is entirely in English.
- Continue by pressing the “+” key until you reach the “COUNTER ACCESS” option. When you’ve arrived, press the OK button.
- A page counter will now appear on the printer’s screen. The number on it denotes the total number of printed pages.
- Then, press the “OK” button.
- Now you must press the “COPY” button.
- To reduce this score to zero, use the “-key” (0). Now press the “OK” button.
- Use the + symbol to navigate the menu until you reach SCAN PAGE COUNT. Return this counter to zero (0) to clear the score on our Canon printer’s page counter, which is only visible when the printer is in service mode.
- Work your way through the menu until you reach the option “ABS-M DONT COUNT.” Click the “OK” button to reset this score to zero (0).
- After you’ve turned off everything else, press the stop/reset button.
- Turn your printer off and on again by pressing the on/off button.
- Disconnect and reconnect the printer’s power cable if the INVALID KEY message appears on your computer screen at the end of this procedure.